Stepper Motor and ULN2003

IMPORTANT

In many computers the current is not enough to drive the servo!!!

If it does not work, keeps disconnecting, or rebooting the ESP the power is not sufficent and you need an extra power supply.

Description

A stepper motor is a motor where the turning can be controlled in steps.

Our motor has about 508 steps for 360° (the motor itself has 64 steps but there is a gear train on top)

more details:

• http://www.jangeox.be/2013/10/stepper-motor-28byj-48_25.html
• https://cookierobotics.com/042/
• see https://github.com/zhcong/ULN2003-for-ESP32

ULN2003 driver module.

How to connect it electrically

Required Module and Files

• We use Stepper.py
• this is downloaded from https://github.com/zhcong/ULN2003-for-ESP32
• the original file is at https://github.com/zhcong/ULN2003-for-ESP32/blob/master/Stepper.py
• this is based on: https://github.com/IDWizard/uln2003 by (c) IDWizard 2017,MIT License.

How to control it in MicroPython

import Stepper
from machine import Pin

In1 = Pin(32,Pin.OUT)
In2 = Pin(33,Pin.OUT)
In3 = Pin(25,Pin.OUT)
In4 = Pin(26,Pin.OUT)

s1 = Stepper.create(In1,In2,In3,In4, delay=10)

s1.step(509,-1)

s1 = Stepper.create(In1,In2,In3,In4, delay=1)

s1.step(509)