Difference between revisions of "Analog Joystick"
Jump to navigation
Jump to search
| Line 12: | Line 12: | ||
= How to connect it electrically = | = How to connect it electrically = | ||
| − | [[ | + | [[File:Joystick-electro.JPG|x400px]] |
| + | |||
| + | File:Joystick-inside.PNG | ||
= How to control it in MicroPython = | = How to control it in MicroPython = | ||
Revision as of 21:11, 29 August 2020
Contents
Description
The analog joystick includes 2 Potentiometer and one digital switch.
It has 5 connectors:
- GND - connected to GND
- 5V - which is in our cases connected to 3.3V
- VRx - the voltage representing the position in X
- VRy - the voltage representing the position in Y
- SW - 0 if pressed
How to connect it electrically
File:Joystick-inside.PNG
How to control it in MicroPython
Basic code to generate a 500 Hz signal
reading all values and printing them to the console
1 #Example usage for ESP32
2 from machine import Pin, ADC
3 from time import sleep
4 # analog inputs for X and Y
5 analogPinX = ADC(Pin(34))
6 analogPinY = ADC(Pin(35))
7 #switching the analog input to 12Bit (0...4095)
8 analogPinX.atten(ADC.ATTN_11DB)
9 analogPinY.atten(ADC.ATTN_11DB)
10 # digital input on pin 26
11 sw = Pin(26, Pin.IN, Pin.PULL_UP) # enable internal pull-up resistor
12
13 while True:
14 analogValX = analogPinX.read()
15 analogValY = analogPinY.read()
16 switch = sw.value()
17
18 print("x:%s y:%s sw:%s" % (analogValX, analogValY, switch))
19
20 sleep(1)
Related Tutorial Videos
