3D Printer/ELEGOO Neptune 4: Difference between revisions
Jump to navigation
Jump to search
Created page with "== Prepare Printer == # First clean the magnetic steel sheet. To do so pull it up on the two front edges and spray a few times with isopropyl alcohol on it. # Wipe it up with a paper towel. # Place back the steel sheet." |
(No difference)
|
Revision as of 11:37, 26 November 2025
Prepare Printer
- First clean the magnetic steel sheet. To do so pull it up on the two front edges and spray a few times with isopropyl alcohol on it.
- Wipe it up with a paper towel.
- Place back the steel sheet.