RGB LED

From Sketching with Hardware at LMU Wiki
Jump to navigation Jump to search

Description

A regular RGB LED is basically 3 LEDs (one red, one green, one blue) in parallel. This is not a smart LED, for smart LEDs see LED Ring NeoPixel.

Rgb-foto.JPG

How to connect it electrically

The RGB LED is connected like 3 paralell LEDs. It is important that you need one resistor for each color! The resistor goes before the LED and not onto the common ground.

RgbIMG 9775.jpg


How to control it in MicroPython

1 # todo 
2 # code goes here

A small Program in MicroPython

 1 from machine import Pin, PWM
 2 from time import sleep
 3 
 4 # connect it to Pin 26, 27, and 14
 5 blue = PWM(Pin(26))
 6 green = PWM(Pin(27))
 7 red = PWM(Pin(14))
 8 
 9 # base frequency for PWM is 1000Hz
10 blue.freq(1000)
11 green.freq(1000)
12 red.freq(1000)
13 
14 # this is a function to allows to give an "RGB"-Color to the LED
15 # duty take an argument from 0 to 2023... by multiplying the 0..255 by 4 we get 0 to 2020 - which seems close enough
16 def rgb(r=255,g=255,b=255):
17   blue.duty(b*4)          # set duty cycle
18   green.duty(g*4)          # set duty cycle
19   red.duty(r*4)          # set duty cycle
20 
21 # show some cases....
22 while True:
23   rgb(255,255,255) # white
24   sleep(1)
25   rgb(0,0,0) # off = black
26   sleep(1)
27   rgb(255,0,0) # red
28   sleep(1)
29   rgb(0,255,0) # gree
30   sleep(1)
31   rgb(0,0,255) # blue
32   sleep(1)

Rgb-setup1.JPG

Rgb-setup2.JPG

Rgb-setup3.JPG

Related Tutorial Videos

In this part of the tutorial, we show how to connect an RGB-LED and programming it with Micropython. We first look at what an RGB LED is by building one with 3 separate LEDs. We then look at switching it on and off and how to set the color using the duty cycle in the PWM output.

Background

text

image(s)