UBISS2024-Links: Difference between revisions

From Sketching with Hardware at LMU Wiki
Jump to navigation Jump to search
 
(3 intermediate revisions by one other user not shown)
Line 2: Line 2:


== Install the Arduino Nano RP2040 Connect Firmware ==
== Install the Arduino Nano RP2040 Connect Firmware ==
Download the firmware for the Arduino Nano RP2040 Connect from https://micropython.org/download/ARDUINO_NANO_RP2040_CONNECT/
[[Arduino_Nano_RP2040_Connect#Install the Arduino Nano RP2040 Connect Firmware|Install the Arduino Nano RP2040 Connect Firmware]]
 
Unplug the board from the computer.
Force the board in bootloader mode by connecting GND and REC pin with a wire:
https://docs.arduino.cc/tutorials/nano-rp2040-connect/rp2040-openmv-setup/
 
Plug the board into the USB port on your computer, it appears as a drive in your filesystem
[[File:Drive01.png|200px]]
 
Remove the wire between the GND and REC pin (before you copy the file onto the device)
[[File:Arduino01a.jpg|200px]]
 
Copy the firmware you downloaded on the drive that showed up in your file system
[[File:file-copy.PNG|200px]]
 
Once it is completely copied to the device, unplug the board and plug in again
[[File:Arduino02.jpg|200px]]
 
Now you should be able to use Arduino Lab for Micropython development environment, https://labs.arduino.cc/en/labs/micropython


== alternative ==
== alternative ==

Latest revision as of 22:46, 10 June 2024

Getting Started

Install the Arduino Nano RP2040 Connect Firmware

Install the Arduino Nano RP2040 Connect Firmware

alternative

Programming Environment for MiroPython

Nano RP2040 Connect board details

MicroPython basics - Tutorial

List of Links

Micropython Basics

Python / Jupyter Notebooks for Hardware

Development environments

Libraries

Data sheets and resources


Tutorials

Machine Learning Basics


everywhereml

TinyML

Networking Basics