3D Printer/Bambu Lab P1S: Difference between revisions

Revision as of 16:50, 1 December 2025

First clean the magnetic steel sheet. To do so pull it up on the front edge and spray a few times with isopropyl alcohol on it.
Wipe it up with a paper towel.
Place back the steel sheet. Please note the orientation of the plate.

To use the printer, you will need an application which converts the 3d model into a file that can be interpreted by the printer.
Visit https://bambulab.com/en/download/studio and download the application for your OS.
After that open the app and follow the instructions to set it up.
Set your login region to Europe and click on Next.
You will be asked to join their customer experience improvement program. You can skip that.
Click on Clear all to remove all printers as you will only need the settings of the printer that is in the workshop. For that select the Bambu Lab P1S with 0.4mm nozzle and click on Next.
There are different types of filament that can be used for printing. But for this printer you will always use Generic PLA. Please go through the list and make sure that Generic PLA is selected.
As this printer is not connected to the network unselect all settings in this step.
After that go to the Prepare tab and select the right nozzle of the printer, which is Bambu Lab P1S 0.4 nozzle.
Set the Plate type to Textured PEI Plate.

@@ Line 19: / Line 19: @@
 # There are different types of filament that can be used for printing. But for this printer you will always use '''Generic PLA'''. Please go through the list and make sure that '''Generic PLA''' is selected.
 # As this printer is not connected to the network unselect all settings in this step.<br>[[File:bambu_lab_p1s_3_7.png|450px]]<br><br>
+# After that go to the '''Prepare''' tab and select the right nozzle of the printer, which is '''Bambu Lab P1S 0.4 nozzle'''.<br>[[File:bambu_lab_p1s_3_8.png|450px]]<br><br>
+# Set the '''Plate type''' to '''Textured PEI Plate'''.<br>[[File:bambu_lab_p1s_3_9.png|450px]]<br><br>