3D Printer/Bambu Lab P1S

From Sketching with Hardware at LMU Wiki
Revision as of 13:00, 26 November 2025 by Vladislav (talk | contribs)
Jump to navigation Jump to search

Prepare Printer

  1. First clean the magnetic steel sheet. To do so pull it up on the front edge and spray a few times with isopropyl alcohol on it.


  2. Wipe it up with a paper towel.
  3. Place back the steel sheet. Please note the orientation of the plate.



Change Filament

Set up PrusaSlicer

  1. To use the printer, you will need an application which converts the 3d model into a file that can be interpreted by the printer.
  2. Visit https://bambulab.com/en/download/studio and download the application for your OS.


Retrieved from "http://www.sketching-with-hardware.org/wiki/index.php?title=3D_Printer/Bambu_Lab_P1S&oldid=1957"